Intrusion & After-Hours
Intruders warned off before they reach the asset.
The Intrusion & After-Hours agent detects people in armed zones after hours and responds on the spot with light, siren and a spoken warning. On solar 4G units the detection and deterrence run on the device itself, so they keep working if the signal drops, and you get one clean alert per real event.

Intrusion & After-Hours agent
Detects people in armed zones after hours and warns them off on the spot.
Trusted on live sites
Scopis runs on active construction sites, automotive sites and utility infrastructure.
Offices in Dublin and Hong Kong
What the Intrusion & After-Hours agent does on your site
- Light, siren and voice warning
- Keeps working if 4G drops
- One alert per real event
Live in four steps
- 01
Connect
Existing ONVIF cameras, or solar 4G units where there is no power or network.
- 02
Configure
Draw the zones, set the schedule and choose who gets which alert.
- 03
Set the bar
Choose how confident the agent must be before it acts on its own.
- 04
Act and record
Warning on site where it applies, alert with the clip, and an audit entry.
Intrusion & After-Hours: common questions
Does the Intrusion & After-Hours agent need new cameras?
No. It runs on existing ONVIF fixed and PTZ cameras. Where a site has no power, network or cameras, solar 4G units add coverage and report into the same platform.
Does someone have to watch the Intrusion & After-Hours alerts?
No. It acts on its own above the confidence threshold you set. Below it, events can go to optional human review by a licensed monitoring partner, only if you want that.
Where is the Intrusion & After-Hours agent used?
Typically on all sites sites, alongside other Scopis agents on the same cameras.
Related agents
See the Intrusion & After-Hours agent on your own cameras.
A 30-minute walkthrough on live deployments, then a pilot on one zone of your site before anything is committed.



