Machinery Safety

Vehicles & plant Auto + review option

Nobody inside the swing radius without someone knowing.

The Machinery Safety agent watches the working radius of excavators, cranes and other plant from site cameras, and alerts the operator and supervisor when a person steps inside. It also flags unauthorised operation, so plant only moves when the right people are in the right places.

Machinery Safety on a live site

Machinery Safety agent

Spots people inside the working radius of excavators, cranes and other plant.

Trusted on live sites

Scopis runs on active construction sites, automotive sites and utility infrastructure.

Offices in Dublin and Hong Kong

What it does

What the Machinery Safety agent does on your site

  • Swing-radius and lifting-zone alerts
  • Unauthorised operation detection
  • Alert to the operator and supervisor
ConstructionQuarries
How it works

Live in four steps

  1. 01

    Connect

    Existing ONVIF cameras, or solar 4G units where there is no power or network.

  2. 02

    Configure

    Draw the zones, set the schedule and choose who gets which alert.

  3. 03

    Set the bar

    Choose how confident the agent must be before it acts on its own.

  4. 04

    Act and record

    Warning on site where it applies, alert with the clip, and an audit entry.

Questions

Machinery Safety: common questions

Does the Machinery Safety agent need new cameras?

No. It runs on existing ONVIF fixed and PTZ cameras. Where a site has no power, network or cameras, solar 4G units add coverage and report into the same platform.

Does someone have to watch the Machinery Safety alerts?

No. It acts on its own above the confidence threshold you set. Below it, events can go to optional human review by a licensed monitoring partner, only if you want that.

Where is the Machinery Safety agent used?

Typically on construction and quarries sites, alongside other Scopis agents on the same cameras.

See it on your site

See the Machinery Safety agent on your own cameras.

A 30-minute walkthrough on live deployments, then a pilot on one zone of your site before anything is committed.